Kia Optima Manuals

Kia Sorento: Cylinder Head Disassembly - Cylinder Head Assembly - Engine Mechanical SystemKia Sorento: Cylinder Head Disassembly

Kia Sorento (XM, 2011-2015) Service Manual / Engine Mechanical System / Cylinder Head Assembly / Cylinder Head Disassembly

  
Identify MLA(Mechanical Lash Adjuster), valves, valve springs as they are removed so that each item can be reinstalled in its original position.
1.
Remove the MLAs (A).
2.
Remove the valves.
(1)
Using SST (09222-3K000, 09222-3K100), compress the valve spring and remove retainer lock.
(2)
Remove the spring retainer.
(3)
Remove the valve spring.
(4)
Remove the valve.
(5)
Using needle-nose pliers, remove the valve stem seal.
  
Do not reuse old valve stem seals.
Cylinder Head Removal
  ...
Cylinder Head Inspection
Cylinder Head 1. Inspect for flatness. Using a precision straight edge and feeler gauge, measure the surface the contacting the cylinder block and the manifolds fo...
See also:

Temperature Control Actuator Description
The heater unit includes mode control actuator and temperature control actuator. The temperature control actuator is located at the heater unit. It regulates the temperature by the proced ...

Room Lamp Inspection
1. Remove the room lamp assembly then check for continuity between terminals. [Sunroof] [General] ...

Fuel Line Installation
1. Install in the reverse order of removal. ...

Manuals list

Copyright © xm.ksmanual.com 2014-2026 - 0.0438