Kia Sorento: Description - Crankshaft Position Sensor (CKPS) - Engine Control System - Engine Control / Fuel SystemKia Sorento: Description

Kia Sorento (XM, 2011-2015) Service Manual / Engine Control / Fuel System / Engine Control System / Crankshaft Position Sensor (CKPS) / Description

Crankshaft Position Sensor (CKPS) detects the crankshaft position and is one of the most important sensors of the engine control system. If there is no CKPS signal input, the engine may stop because of CKPS signal missing. This sensor is installed on the cylinder block or the transaxle housing and generates alternating current by magnetic flux field which is made by the sensor and the target wheel when engine runs.
The target wheel consists of 58 slots and 2 missing slots on 360 degrees CA (Crank Angle).

Crankshaft Position Sensor (CKPS)
...
Wave Form
...
See also:

Operating conditions. Deactivating ISG
Operating conditions The ISG system on your Kia Sorento functions only when a strict set of environmental and mechanical parameters are met: The driver's safety seat belt is sec ...

Shift Lever Installation
1. Install in the reverse order of removal.    Set shift lever and inhibitor ...

Specifications
Direct control VFS[OD/C] ▷ Control type : Normal high type Control Pressure kpa (kgf/cm², psi) 539.370 ~ 0 ( 5.5 ~ 0, 78.23 ~ 0) Current value(mA) ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0539