Kia Sorento: Description
Automatic transaxle system relies on various measurement data to determine
the current control status and extrapolate the necessary compensation values.
These values are used to control the actuators and achieve the desired control
output. If a problem with the drivetrain, including the transaxle, has been
identified, perform self-diagnosis and basic transaxle inspection (oil and fluid
inspection) and then check the control system's components using the diagnosis
tool.
Automatic Transaxle Control System
Control System Composition
See also:
Measurement Method
Projected Dimensions
1.
These are the dimensions measured when the measurement points
are projected into the reference plane, and are the reference dimensions ...
Passenger Airbag (PAB) Module Description
Passenger Airbag (PAB) module is located in the passenger crash pad. This
PAB contains 2 firing squibs of airbag and 1 firing squib of active vent. Depending
of crash speed or the tightening ...
When the EPB is not released
If the EPB does not release normally due to an electrical or mechanical fault, load your vehicle onto a flatbed tow
truck and take it to an authorized Kia dealer to have the system thoroughly ins ...
Manuals list
- Kia Sorento MQ4 2021-2026 Owners Manual
- Kia Sorento XM 2011-2015 Owners Manual
- Kia Sorento XM 2011-2015 Service Manual
Copyright © xm.ksmanual.com 2014-2026