Kia Sorento: Fuel Line Removal - Fuel Delivery System - Engine Control / Fuel SystemKia Sorento: Fuel Line Removal

Kia Sorento (XM, 2011-2015) Service Manual / Engine Control / Fuel System / Fuel Delivery System / Fuel Line Removal

1.
Turn the ignition switch OFF, and then remove battery (-) cable.
2.
Release the residual pressure in fuel line.
(Refer to the Fuel Delivery System - Repair Procedures - "Release Residual Pressure in Fuel Line")
3.
Disconnect the low pressure fuel quick-connector (A).

4.
Disconnect the vapor hose (A) which is connected from the PCSV.

5.
Lift the vehicle.
6.
Remove the fuel tank.
(Refer to Fuel Delivery System - " Fuel Tank")
7.
Disconnect the vapor tube quick-connector (A).

8.
Open the vapor tube and low fuel line fixing clip to using driver.
9.
Release the under cover (A) after remove the mounting bolts.

10.
Disconnect the fuel & brake line protect (A) from the fixing clip.

11.
Disconnect the fuel line fixing bracket (A) to engine room low.

12.
Remove the fuel line.
Fuel Pressure Regulator Installation
1. Install in the reverse order of removal....
Fuel Line Installation
1. Install in the reverse order of removal....
See also:

Components and Components Location
Component 1. Front Impact Sensor (FIS)2. Airbag Control Unit (ACU)3. Front Acceleration type Side Impact Sensor (A-SIS) 4. Pressure t ...

Crankshaft Repair procedures
Disassembly ...

DC DC converter Schematic Diagrams. DC DC converter Repair procedures
DC DC converter Schematic Diagrams Circuit Diagram DC DC converter Repair procedures Removal 1. Remo ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0529