Kia Sorento: Heated Steering wheel Inpection - Steering wheel - Steering SystemKia Sorento: Heated Steering wheel Inpection

Kia Sorento (XM, 2011-2015) Service Manual / Steering System / Steering wheel / Heated Steering wheel Inpection

1.
Measure a resistance of NTC and Heated pad.
A.
NTC resistance(Black / Yellow, Black) - 10.0 kΩ ± 10% (25°C)
B.
Heated pad resistance (Yellow, Black) - 1.6 ~ 2.0 Ω ± 10%
2.
Measure a temperature.
A.
The temperature of wheel surface grip must rise from -20°C to 20°C within 6 minute
B.
The temperature of wheel surface grip must keep 38°C ± 4°C after 25 minute
C.
At that time switch on, all measure point (1~8)

Heated Steering wheel System Circuit Diagram
Terminal Function Housing Pin Function Wire color Pad A GND Back B HEATER Yellow C NTC+ ...
Flex Steering Components Location
1. Flex steering switch...
See also:

Additional safety precautions
Never allow passengers to ride in the cargo area or on top of a folded-down back seat. All occupants must sit upright, positioned fully back in their respective seats with ...

Driver position memory system (if equipped, for power seat)
A driver position memory system is provided to store and recall the driver seat and outside rearview mirror position with a simple button operation. By saving the desired position into the system ...

Explanation of scheduled maintenance items
Engine oil and filter The engine oil and filter should be changed at the intervals specified in the maintenance schedule. If the vehicle is being driven in severe conditions, more frequent oil and ...

Copyright © xm.ksmanual.com 2014-2026