Kia Sorento: Inspection - Purge Control Solenoid Valve (PCSV) - Engine Control System - Engine Control / Fuel SystemKia Sorento: Inspection

Kia Sorento (XM, 2011-2015) Service Manual / Engine Control / Fuel System / Engine Control System / Purge Control Solenoid Valve (PCSV) / Inspection

1.
Turn the ignition switch OFF.
2.
Disconnect the PCSV connector.
3.
Measure resistance between the PCSV terminals 1 and 2.
4.
Check that the resistance is within the specification.

Specification: Refer to
    1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the purge control solenoid valve connector (A). ...
    See also:

    Specifications, Consumer information and Reporting safety defects
    Dimensions *1 with roof rack *2 with sunroof and roof rack Engine Bulb wattage Tires and wheels CAUTION When replacing tires, use the same size originally supplied with the vehicle. ...

    ICM Relay Box Inspection
    Rear Wiper Motor relay Check for continuity between the terminals. 1. There should be continuity between the No.1 and No.3 terminals when power and ground are conne ...

    Power tailgate (if equipped)
    (1) Power tailgate open/close button (2) Power tailgate off button (3) Power tailgate handle switch (4) Power tailgate close button ✽ NOTICE The power tailgate operates when: Automat ...

    Copyright © xm.ksmanual.com 2014-2026 - 0.051