Kia Sorento: Inspection - Fuel Pressure Control Valve - Engine Control System - Engine Control / Fuel SystemKia Sorento: Inspection

Kia Sorento (XM, 2011-2015) Service Manual / Engine Control / Fuel System / Engine Control System / Fuel Pressure Control Valve / Inspection

1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Disconnect the fuel pressure regulator valve connector.
3.
Measure resistance between the fuel pressure regulator valve terminals 1 and 2.
4.
Check that the resistance is within the specification.

Specification: Refer to
    Canister Close Valve (CCV) is installed on the canister ventilation line. It seals evaporative emission control system by shutting the canister from the atmosphere when leakage detecting system ...
    See also:

    Heater Core Replacement
    1. Disconnect the negative (-) battery terminal. 2. Remove the heater and blower assembly. (Refer to Heater -"Heater Unit") ...

    Surround View Monitor settings
    Warning Methods ...

    Front Lower Arm Inspection
    1. Check the bushing for wear and deterioration. 2. Check the lower arm for bending or breakage. 3. Check the ...

    Copyright © xm.ksmanual.com 2014-2026 - 0.0424