Kia Sorento: Inspection
| 1. |
Turn ignition switch OFF.
|
| 2. |
Remove the air duct.
(Refer to Engine Mechanical System - "Air cleaner")
|
| 3. |
Disconnect the solenoid valve connector (A).
|
| 4. |
Measure resistance between sensor signal terminal and sensor ground
terminal.
|
| 5. |
Check that the resistance is within the specification.
|
E-CVVT Motor Description and Operation. E-CVVT Motor On Vehicle Inspection
E-CVVT Motor Description and Operation
Description
•
Electric Continuous Variable Valve Timing (E-CVVT) system, lo ...
Line Pressure Control Solenoid Valve (LINE_VFS) Installation
Installation
1.
Install in the reverse order of removal.
...
Record your key number
The key code number is stamped on the key code tag attached to the key set. Should
you lose your keys, this number will enable an authorized Kia dealer to duplicate
the keys easily. Remove the key ...