Kia Sorento: Quarter Fixed Glass Removal
| •
|
Put on gloves to protect your hands.
|
| •
|
Take care not to body surface and other parts.
|
|
|
1. |
Remove the following parts.
| A. |
Second row seat assembly
|
| B. |
Third row seat assembly
|
|
|
2. |
Loosen the quarter fixed glass (A) mounting nut.
Tightening torque :
5.9 ~6.4N.m (0.6~0.65Kgf.m, 4.3~4.7lb-ft)
|
|
|
3. |
Cut out the sealant using the sealant cutting tool (09861-31100).
|
• |
Do not scrape down to the painted surface of the
body; damaged paint will interfere with proper bonding.
|
|
• |
Remove the rubber dam and fastereners from the
body.
|
|
• |
Mask off surrounding surfaces before painting.
|
|
|
|
4. |
Remove the quarter fixed glass.
|
1.
With a knife, scrape the old adhesive smooth to a thickness of
about 2mm (0.08 in.) on the bonding surface around the entire windshield
opening flange :
A.
...
1.
With a putt knife, scrape the old adhesive smooth to a thickness
of about 2mm (0.08 in.) on the bonding surface around the entire quarter
fixed glass flange.
A.
...
See also:
Drive Belt Tensioner Removal and Installation
1.
Remove the drive belt.
(Refer to Timing System - "Drive Belt")
2.
Remove the drive belt auto tensioner(A).
...
Compressor Components
1. Center Bolt
2. Hub Bolt
3. Hub Assembly
4. Snap Ring
5. Pulley
6. Compressor Assembly
7. Electric Control Valve
...
Oil Cooler Installation
1.
Apply a light coat of engine oil to the oil cooler packing surface (A),
and then install the oil cooler with fix bolt (B).
Tightening torque:
...
Windshield Glass Installtion
Quarter Fixed Glass Installation
