Kia Sorento: Rear Hub - Carrier Disassembly - Rear Axle Assembly - Driveshaft and axleKia Sorento: Rear Hub - Carrier Disassembly

Kia Sorento (XM, 2011-2015) Service Manual / Driveshaft and axle / Rear Axle Assembly / Rear Hub - Carrier Disassembly

1.
Remove the hub assembly mounting bolts (A-4ea) from the rear axle carrier (B).

Tightening torque:
78.5 ~ 88.3N.m (8.0 ~ 9.0kgf.m, 57.9 ~ 65.1lb-ft)

2.
Remove the hub assembly (C) and the parking brake assembly (B) from the rear axle carrier (A).
  
Do not disassemble the hub assembly.

3.
Assembly is the reverse order of disassembly.
Rear Hub - Carrier Removal
1. Remove the front wheel and tire (A) from front hub. Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) ...
Rear Hub - Carrier Inspection
1. Check the hub for cracks and the splines for wear. 2. Check the rear axle carrier for cracks....
See also:

Cruise Control Switch Removal
1. Disconnect the battery (-) terminal. 2. Remove the air-bag module from the steering wheel. ( Refer to RT group) 3. ...

Road warning. Hazard lights switch. If the engine does not start
Road warning. Hazard lights switch When an unexpected emergency situation occurs while you are driving your Kia Sorento or when you are forced to park along the edge of the road, immediately turn you ...

TPMS Sensor Replacement
Replacement 1. Remove the wheel and tire. (Refer to Tires/Wheels - "Wheel") ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0692