Kia Optima Manuals

Kia Sorento: Rear Wiper Motor Installation - Rear Wiper/Washer - Body Electrical SystemKia Sorento: Rear Wiper Motor Installation

Kia Sorento (XM, 2011-2015) Service Manual / Body Electrical System / Rear Wiper/Washer / Rear Wiper Motor Installation

1.
Install the rear wiper motor assembly.
Tightening torque Nut :
7 ~ 11 N.m (0.7 ~ 1.1 kgf.m, 5 ~ 7.9 lbf-ft)
2.
Install the tailgate trim.
3.
Install the rear wiper arm and rear wiper cap.
Tightening torque Nut(B) :
4 ~ 7 N.m (0.4 ~ 0.7 kgf.m, 2.9 ~ 5.0 lbf-ft)
4.
Install the rear wiper arm and blade to align with black rear defogger line (A).
5.
Set the rear washer nozzle on the specified spray position.

Specified position
 Distance (in)
 Distance (mm)
A
 1.57
 40
B
 3.18
 81
C
 8.66
 220
D
 6.61
 168
E
 8.97
 228

Rear Wiper Motor Removal
1. Detach the rear wiper cap (A). 2. Remove the rear wiper arm & blade (A) after removing rear wiper HEX nut (B). ...
Rear Washer Switch Inspection
Check for continuity between the terminals while operating the wiper and washer switch. If it is not normal condition, replace wiper and wiper switch. Rear Wiper Switch Rear Washer Switch...
See also:

Component Replacement After Deployment
   Before doing any SRS repairs, use the GDS Pro to check for DTCs. Refer to the Diagnostic Trouble Code list for repairing ...

Front seat adjustment for power seat : (if equipped)
If your Kia Sorento is equipped with full power seat controls, you can precisely calibrate the driver's seat position using the intuitive electronic control switches located on the lower outer tr ...

Cylinder Head Reassembly
   Thoroughly clean all parts to be assembled. Before installing the parts, apply fresh engine oil to all sliding and ...

Manuals list

Copyright © xm.ksmanual.com 2014-2026 - 0.0433