Kia Sorento: Removal - Back View Camera System - Body Electrical SystemKia Sorento: Removal

Kia Sorento (XM, 2011-2015) Service Manual / Body Electrical System / Back View Camera System / Removal

1.
Remove the tailgate trim in the trunk after removing the screws and clips.
(Refer to Body - "Tailgate")
2.
Remove the tailgate garnish (A) after disconnecting the connector.

3.
Remove the back view camera (A) after removing the screws (2EA).

Description
Back view camera will activate when the backup light is ON with the ignition switch ON and the shift lever in the R position. This system is a supplemental system that shows behind the vehicle ...
Installation
1. Install the back view camera. 2. Install the tailgate garnish and trim....
See also:

AC Inverter Unit Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the right luggage side trim. (Refer to Body - "Luggage Side Trim") ...

System Overview
RPAS (Rear Parking Assist System) is an electronic driving aid that warns the driver to be cautious while parking or in low speed environments. The sensor uses ultrasonic waves to detect obje ...

Forward Collision-Avoidance Assist (FCA) (Sensor Fusion)
Basic function The Forward Collision-Avoidance ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0547