Kia Sorento: Removal
| 1. |
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
|
| 2. |
Disconnect the manifold absolute pressure sensor connector (A).
|
| 3. |
Remove the installation bolt (B), and then remove the sensor from
the surge tank.
|
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the MAPS at idle and IG ON.
Specification:...
Installation
•
Install the component with the specified torques.
•
Note that in...
See also:
Drive mode integrated control system. Drive mode
Drive mode
You may select the drive mode according to preference or road condition.
...
Engine compartment
The actual engine compartment layout in your specific Kia Sorento model may differ slightly from the provided illustration based on regional specifications.
Engine ...
Components
1. Cooling fan
2. Radiator upper hose
3. Radiator lower hose
4. Radiator
5. Condenser
6. Side air guard
7. Over flow hose
8. Reservior tank
9. Radiator cap
...
Manuals list
- Kia Sorento MQ4 2021-2026 Owners Manual
- Kia Sorento XM 2011-2015 Owners Manual
- Kia Sorento XM 2011-2015 Service Manual
Copyright © xm.ksmanual.com 2014-2026