Kia Sorento: Removal
| 1. |
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
|
| 2. |
Disconnect the crankshaft position sensor connector (A).
|
| 3. |
Remove the protector (A).
|
| 4. |
Remove the installation bolt (A), and then remove the crankshaft
position sensor.
|
Inspection
1.
Check the signal waveform of the CMPS and CKPS using the GDS.
Specification:
Refer to “Wave Form”...
Installation
•
Install the component with the specified torques.
•
Note that in...
See also:
Oil Pump Component Location
1. Automatic transaxle
2. Oil pump assembly
...
Front seat adjustment for manual seat systems (if equipped)
To manually adjust the front seat position, locate and activate the ergonomic control levers mounted on the outer
side and front lower base of the seat cushion assembly.
Moving forward and backwa ...
Catalytic Converter Installation
1.
Install in the reverse order of removal.
...
Manuals list
- Kia Sorento MQ4 2021-2026 Owners Manual
- Kia Sorento XM 2011-2015 Owners Manual
- Kia Sorento XM 2011-2015 Service Manual
Copyright © xm.ksmanual.com 2014-2026