Kia Sorento: Removal - CVVT Oil Control Valve (OCV) - Engine Control System - Engine Control / Fuel SystemKia Sorento: Removal

Kia Sorento (XM, 2011-2015) Service Manual / Engine Control / Fuel System / Engine Control System / CVVT Oil Control Valve (OCV) / Removal

1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Disconnect the CVVT oil control valve connector (A).
3.
Remove the installation bolt (B), and then remove the valve from the engine.
[Bank 1 / Intake]

[Bank 1 / Exhaust]

Inspection
1. Turn the ignition switch OFF. 2. Disconnect the OCV connector. 3. Measure resistance between the OCV terminals 1 and 2....
Installation
  ...
See also:

Cooling Fan Repair procedures
Removal and Installation Cooling Fan Assembly 1. Disconnect the battery negative ( - ) terminal. ...

Heater and Air Conditioning Controller On Vehicle Inspection
On Vehicle Inspection Self Diagnosis ...

Operating door locks from outside the vehicle
Turn the key clockwise to unlock and counterclockwise to lock. If you lock the driver ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0674