Kia Sorento: Transaxle Control Module (TCM) Removal
When replacing the TCM, the vehicle equipped with the immobilizer
must be performed procedure as below.
[In the case of installing used TCM]
[In the case of installing new TCM]
Perform "Key teaching" procedure with GDS.
(Refer to Body Electrical System - "Immobilizer System")
|
When replacing the TCM, the vehicle equipped with the smart key
system (Button start) must be performed procedure as below.
[In the case of installing used TCM]
[In the case of installing new TCM]
Insert the key (or press the start button) and turn it to the
IGN ON and OFF position. Then the TCM learns the smart key information
automatically.
|
| 1. |
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
|
| 2. |
Disconnect the TCM Connector (A).
|
| 3. |
Remove the battery.
(Refer to Engine Electrical System - "Battery")
|
| 4. |
Remove the air cleaner assembly.
(Refer to Engine Mechanical System - "Air Cleaner")
|
| 5. |
Remove the mounting bolts (A) and nut (B), and then remove the
TCM (C).
|
| 6. |
After removing the installation nuts (A) and screws (B), remove
the TCM (C) from the bracket.
|
Transaxle Control Module (TCM) Description
Transaxle Control Module (TCM) is the automatic transaxle's brain. The
module receives and processes signals from various sensors and implements a
wide range of transaxle controls to ensu ...
Transaxle Oil Temperature Sensor Installation
1.
Install in the reverse order of removal.
...
Specifications
Items
Specification
Rated voltage
DC 12V
Operating voltage
9V ~ 16V
Operating speed
30㎞/h ~ 250㎞/h
...