Kia Sorento: Water pump Inspection - Cooling System - Engine Mechanical SystemKia Sorento: Water pump Inspection

Kia Sorento (XM, 2011-2015) Service Manual / Engine Mechanical System / Cooling System / Water pump Inspection

1.
Check each part for cracks, damage or wear, and replace the coolant pump assembly if necessary.
2.
Check the bearing for damage, abnormal noise and sluggish rotation, and replace the coolant pump assembly if necessary.
3.
Check for coolant leakage. If coolant leaks from hole, the seal is defective.
Replace the coolant pump assembly.
  
A small amount of "weeping" from the bleed hole is normal.
Water pump Removal and Installation
1. Loosen the drain plug, and then drain the engine coolant. Remove the radiator cap to help drain the coolant faster. 2. Remove the drive belt af...
Water pump Troubleshooting
Symptoms Possible Causes Remedy Coolant leakage...
See also:

Owner maintenance
The following lists are vehicle checks and inspections that should be performed by the owner or an authorized Kia dealer at the frequencies indicated to help ensure safe, dependable operation of you ...

Automatic heating and air conditioning (A/C) operation. Manual heating and air conditioning (A/C) operation
Automatic heating and air conditioning (A/C) operation Press the icon. The modes, fan speeds, air intake, and air-conditioning are controlled automatically by setting the ...

Inside Rear View Mirror Repair Procedures
Removal 1. Disconnect the battery negative ( - ) terminal. 2. Remove the multi ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0592