Kia Sorento: A/C Pressure Transducer Description - Air conditioning System - Heating,Ventilation And Air ConditioningKia Sorento: A/C Pressure Transducer Description

Kia Sorento (XM, 2011-2015) Service Manual / Heating,Ventilation And Air Conditioning / Air conditioning System / A/C Pressure Transducer Description

The A/C Pressure Transducer (APT) converts the pressure value of high pressure line into voltage value after measuring it. By converted voltage value, engine ECU controls the cooling fan by operating it high speed or low speed. Engine ECU stops the operation of the compressor when the temperature of refrigerant line is very high or very low irregularly to optimize air conditioning system.

Receiver-Drier Replacement
1. Remove the condenser. 2. Remove the cap (B) on the bottom of the condenser with a L wrench (A). Tightening torqu...
A/C Pressure Transducer Inspection
1. Measure the pressure of high pressure line by measuring voltage output between terminal...
See also:

Front Impact Sensor (FIS) On Vehicle Inspection
On Vehicle Inspection Diagnostic with KDS 1. The front impact sensor can be more quickly diagnosed for ...

General
1. Basically, all measurements in this manual are taken with a tracking gauge. 2. When a measuring tape is used, check to be sure there is ...

Components
1. Intake camshaft 2. Exhaust camshaft 3. Intake CVVT assembly 4. Exhaust CVVT assembly 5. Timing chain 6. Timing chain guide 7. Timing chain tensioner arm 8. Timin ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0485