Kia Sorento: AC Inverter Switch Removal - AC Inverter System - Body Electrical SystemKia Sorento: AC Inverter Switch Removal

Kia Sorento (XM, 2011-2015) Service Manual / Body Electrical System / AC Inverter System / AC Inverter Switch Removal

  
Pry the trim off using a plastic trim tool and apply protective tape around the related parts, to prevent damage.
Put on gloves to protect your hands.
Take care not to scratch the body surface.
1.
Disconnect the negative (-) battery terminal.
2.
Using a screwdriver or remover, remove the floor console upper tray (A).

3.
Disconnect the connectors (A).

4.
Remove the gear boots (B) and gear knob (A).

5.
Using a screwdriver or remover, remove the console upper cover (A).

6.
Disconnect the connectors (A).

7.
Remove the AC switch (A) from the console upper cover.

AC Inverter Oultet Installation
1. Install the power outlet switch. 2. Install the rear console cover. 3. Connect the negative (-) battery terminal....
AC Inverter Switch Installation
1. Install the AC switch. 2. Install the console upper cover and console upper tray. 3. Connect the negative (-) battery t...
See also:

Inspection
Front Door Lock Actuator 1. Remove the front door trim. (Refer to Body - "Front door") 2. Remove the front door module. ...

Precautions
WARNING To reduce the chance of serious or fatal injuries and receive the maximum safety benefit from your restraint system in the Kia ...

Auto Defogging Actuator Description
The auto defogging sensor is installed on front window glass. The sensor judges and sends signal if moisture occurs to blow out wind for defogging. The air conditioner control module receives ...

Copyright © xm.ksmanual.com 2014-2026