Kia Sorento: Accelerator Pedal Installation - Fuel Delivery System - Engine Control / Fuel SystemKia Sorento: Accelerator Pedal Installation

Kia Sorento (XM, 2011-2015) Service Manual / Engine Control / Fuel System / Fuel Delivery System / Accelerator Pedal Installation

1.
Install in the reverse order of removal.

Accelerator pedal module installation nut:
16.7 ~ 25.5 N.m (1.7 ~ 2.6 kgf.m, 12.3 ~ 18.8 lb-ft)
Accelerator pedal module installation bolt:
8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)

Accelerator Pedal Removal
1. Turn the ignition switch OFF and disconnect the negative (-) battery cable. 2. Disconnect the accelerator position sensor connector (A). ...
Delivery Pipe Removal
   In case of removing the high pressure fuel pump, high pressure fuel pipe, delivery pipe, and injector, there may be injury caused by leakage of...
See also:

Drive Belt Removal and Installation
Inspection 1. Check belt for maintenance and abnormal wear of V-ribbed part. Replace if necessary. ...

Inside rearview mirror
Adjust the rearview mirror so that the center view through the rear window is seen. Make this adjustment before you start driving. WARNING - Rear visibility Do not place objects in the rear seat or ...

Components
1. Blind Spot Detection (BSD) Unit 2. BSD switch 3. Speaker (Built in the cluster) 4. BSD warning lamp (Built in the outside mirror) ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0426