Kia Sorento: Accelerator Pedal Removal

Kia Sorento (XM, 2011-2015) Service Manual / Engine Control / Fuel System / Fuel Delivery System / Accelerator Pedal Removal

1.	Turn the ignition switch OFF and disconnect the negative (-) battery cable.

2.	Disconnect the accelerator position sensor connector (A).

3.	Remove the installation nuts (C), the bolt (B) and then remove the accelerator pedal module.

Filler-Neck Assembly Installation

1. Install in the reverse order of removal. Filler-neck assembly bracket installation nut : 3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)...

Accelerator Pedal Installation

1. Install in the reverse order of removal. Accelerator pedal module installation nut: 16.7 ~ 25.5 N.m (1.7 ~ 2.6 kgf.m, 12.3 ~ 18.8 lb-ft) ...

See also:

Brake Pedal Inspection
1. Check the bushing for wear. 2. Check the brake pedal for bending or twisting. 3. Check the brake pedal retur ...

Measurement Method
Projected Dimensions 1. These are the dimensions measured when the measurement points are projected into the reference plane, and are the reference dimensions ...

Digital Key 2 (NFC Card Key)
How to Register Digital Key 2 (NFC Card Key) To pair a physical NFC smart card key with your Kia Sorento, complete the following vehicle programming sequence: Enter your Kia Sorent ...

Manuals list

Copyright © xm.ksmanual.com 2014-2026