Kia Sorento: Ambient Temperature Sensor Replacement
Kia Sorento (XM, 2011-2015) Service Manual / Heating,Ventilation And Air Conditioning / Air conditioning System / Ambient Temperature Sensor Replacement
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the front bumper.
(Refer to Body - "Front Bumper")
|
| 3. |
Disconnect the connector (B) and then remove the ambient temperature
sensor (A).
|
| 4. |
Install in the reverse order of removal.
|
Ambient Temperature Sensor Inspection
1.
Turn the ignition switch ON.
2.
Remove the front bumper.
(Refer to Body - "Front Bumper")
3.
Disconne...
Auto Defogging Sensor Description
The auto defogging sensor is installed on the front window glass. The
sensor judges and sends signal if moisture occurs to blow out wind for defogging.
The air conditioner control module receive...
See also:
Seat Belt Pretensioner (BPT) Description
The Seat Belt Pretensioners (BPT) are installed inside Center Pillar (LH
& RH). When a vehicle crashes with a certain degree of frontal impact, the pretensioner
seat belt helps to reduce ...
ATF Warmer Removal
1.
Drain the coolant.
(Refer to Engine Mechanical System - "Coolant")
2.
Remove the air cleaner assembly and air duct.
...
Automatic release of EPB (if Shift by Wire (SBW) not equipped)
The Electronic Parking Brake (EPB) in your Kia Sorento is designed to disengage automatically when specific operating
conditions are safely met:
The gear is in P (Park): With the ...
Manuals list
- Kia Sorento MQ4 2021-2026 Owners Manual
- Kia Sorento XM 2011-2015 Owners Manual
- Kia Sorento XM 2011-2015 Service Manual
Copyright © xm.ksmanual.com 2014-2026