Kia Sorento: Ambient Temperature Sensor Inspection - Air conditioning System - Heating,Ventilation And Air ConditioningKia Sorento: Ambient Temperature Sensor Inspection

Kia Sorento (XM, 2011-2015) Service Manual / Heating,Ventilation And Air Conditioning / Air conditioning System / Ambient Temperature Sensor Inspection

1.
Turn the ignition switch ON.
2.
Remove the front bumper.
(Refer to Body - "Front Bumper")
3.
Disconnect ambient temperature sensor.
4.
Check the resistance of the ambient temperature sensor between terminals 1 and 2 whether it changes by changing the ambient temperature.

1. Ambient Sensor (+)
2. Ambient Sensor (-)

Specification
Ambient temperature [
    The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, an...
    1. Disconnect the negative (-) battery terminal. 2. Remove the front bumper. (Refer to Body - "Front Bumper") 3. ...
    See also:

    Knock Sensor (KS)
    Knocking is a phenomenon characterized by undesirable vibration and noise and can cause engine damage. Knock Sensor (KS) is installed on the cylinder block and senses engine knocking. Whe ...

    Operating Door Locks with the Smart Key. Using the Mechanical Key Emergency Access
    Operating Door Locks with the Smart Key The keyless entry system in the Kia Sorento allows you to seamlessly lock or unlock all side doors and the rear liftgate without removing the transmitter ...

    Starter Components
    1. Front housing 2. Starter solenoid assembly 3. Lever 4. Lever packing 5. Planet shaft assembly 6. Planetary gear assembly 7. Packing 8. Shield 9. Amature assem ...

    Copyright © xm.ksmanual.com 2014-2026 - 0.0559