Kia Sorento: ATF Warmer Installation - Hydraulic System - Automatic Transaxle SystemKia Sorento: ATF Warmer Installation

Kia Sorento (XM, 2011-2015) Service Manual / Automatic Transaxle System / Hydraulic System / ATF Warmer Installation

1.
Install in the reverse order of removal.
  
Adding automatic transaxle fluid.
(Refer to Hydraulic System - "Fluid")
Adding coolant.
(Refer to Engine Mechanical System - "Coolant")
ATF Warmer Removal
1. Drain the coolant. (Refer to Engine Mechanical System - "Coolant") 2. Remove the air cleaner assembly and air duct. (Refer to ...
Clutch & Brake
...
See also:

Rear Lower Arm Removal
1. Remove the rear wheel and tire (A) from rear hub . Tightening torque : 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) ...

Starter Specification
Starter Item Specification Rated voltage 12 V, 1.2 kW The number of pinion teeth 11 Performance [No-load, 11 V] Ampere ...

Voice Command List
Common Commands: These commands can be used in most operations. (However a few commands may not be available during certain operations) FM/AM radio commands: Commands available during FM, ...

Copyright © xm.ksmanual.com 2014-2026