Kia Optima Manuals

Kia Sorento: Audio Unit Removal - Audio - Body Electrical SystemKia Sorento: Audio Unit Removal

Kia Sorento (XM, 2011-2015) Service Manual / Body Electrical System / Audio / Audio Unit Removal

  
Put on gloves to protect your hands.
  
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
•
Take care not to bend or scratch the trim and panels.
1.
Disconnect the negative (-) battery terminal.
2.
Remove the center fascia panel (A).
(Refer to Body - "Crash pad")
3.
Disconnect the connectors and cables (A) from center fascia panel.
4.
Remove the crash pad center air vent (A).
5.
Remove the audio head unit (A) from crash pad after loosening the screws (4EA).
6.
Disconnect the connectors and cables (A) from head unit.

  
When the compact disc is not ejected, do not remove it forcibly.
Audio Unit Components
Connector Pin Information No Connector A Connector B 1 Rear left speaker (+) CAN high 2 Front left speaker (+) - ...
Audio Unit Installation
1. Connect the audio unit connectors and cable. 2. Install the audio unit. 3. Install the center facia panel. ...
See also:

Precautions
WARNING To reduce the chance of serious or fatal injuries and receive the maximum safety benefit from your restraint system in the Kia ...

Front Body A
* These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ] ...

Special Tools
Tool (Number and name) Illustration Use 09793-21000 Door hinge adjusting wrench Adjustment, removal and installationof the door hinge ...

Manuals list

Copyright © xm.ksmanual.com 2014-2026