Kia Sorento: Auto Head lamp leveling Unit Installation - Head lamp leveling Device - Body Electrical SystemKia Sorento: Auto Head lamp leveling Unit Installation

Kia Sorento (XM, 2011-2015) Service Manual / Body Electrical System / Head lamp leveling Device / Auto Head lamp leveling Unit Installation

Height Sensor & Unit
1.
Install the height sensor.
2.
Connect the connector.
Auto Head lamp leveling Unit Removal
Height Sensor & Unit 1. Disconnect the negative(-) battery terminal. 2. Remove the height sensor connector (A). ...
Auto Head lamp leveling Unit Inspection with GDS
Initialization and diagnosis sequence by using GDS equipment. Below content summarize the procedure for A/S using GDS. No. Procedure 1 Locate vehicle to flat pla...
See also:

Rear Spoiler Repair Procedures
Removal 1. Disconnect the battery negative ( - ) terminal. 2. Remove the tailg ...

Rear Hub - Carrier Repair procedures
Removal [2WD] 1. Disconnect the (-) battery terminal. 2. Remove the rear whee ...

Removal
   Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional hydraulic pressure adjustment; however, the ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0497