Kia Sorento: Auto Light Sensor Removal - Auto Lighting Control System - Body Electrical SystemKia Sorento: Auto Light Sensor Removal

Kia Sorento (XM, 2011-2015) Service Manual / Body Electrical System / Auto Lighting Control System / Auto Light Sensor Removal

1.
Disconnect the negative (-) battery terminal.
2.
Remove the photo & auto light sensor (A) from crash pad upper side by using screw (-) driver.

3.
Remove the auto light connector.
Auto Light Sensor Inspection
In the state of IGN1 ON, when multi function switch module detects auto light switch on, tail lamp relay output and head lamp low relay output are controlled according to auto light sensor's...
Auto Light Sensor Installation
1. Reconnect the auto light connector. 2. Install the auto light sensor....
See also:

Why didn’t my air bag go off in a collision? (Inflation and non-inflation conditions of the air bag). Supplemental Restraint System (SRS) care
Why didn’t my air bag go off in a collision? (Inflation and non-inflation conditions of the air bag) Many types of vehicular accidents do not generate the specific deceleration vectors or f ...

Front Corner Radar Removal
Removal 1. Perform the order below with the KDS before replacing the front corner radar. (S/W Management → Front Corner/Rea ...

Removal
1. Remove the mirror wiring cover (A). 2. Remove the mirror mounting screw (A) and connector (B). 3. ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0522