Kia Sorento: Cluster Ionizer Replacement
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the glove box housing.
(Refer to Body -"Crash Pad")
|
| 3. |
Disconnect the cluster ionizer connector (A).
|
| 4. |
Remove the screws and then remove the cluster ionizer (B).
|
| 5. |
Install in the reverse order of removal.
|
Cluster Ionizer Inspection
Heater
Oil hydraulic Motor(Actuator) Description
The 4WD ECM controls the Pump Motor Pump (Actuator) to generating an oil
pressure. The pressure engages a multiple disk clutch to transfer torque to
the rear wheels. The torque to the rear wh ...
Fuel Filler Cap Description
A ratchet tightening device on the threaded fuel filler cap reduces the
chances of incorrect installation, which would seal the fuel filler. After the
gasket on the fuel filler cap and the fi ...
Clean air: (if equipped)
The clean air function turns ON automatically when the ENGINE START/STOP button is ON.
The clean air function turns OFF automatically when the ENGINE START/STOP button is OFF. ...