Kia Sorento: Cruise Control Switch Inspection

Kia Sorento (XM, 2011-2015) Service Manual / Engine Electrical System / Cruise Control System / Cruise Control Switch Inspection

Measuring Resistance

1.	Disconnect the cruise control switch connector from the control switch.

2.

Measure resistance between terminals on the control switch when each function switch is ON (switch is depressed).

Function switch	Terminal	Resistance
CANCEL	4-5	0Ω
SET/–	4-5	220Ω
RES/+	4-5	910Ω
ON/OFF	3-5	3900Ω

3.	If not within specification, replace switch.

Measuring Voltage

1.	Connect the cruise control switch connector to the control switch.

2.

Measure voltage between terminals on the harness side connector when each function switch is ON (switch is depressed).

Function switch	Terminal	Voltage
CANCEL	4-5	0V ~ 0.22V
SET/–	4-5	1.28V ~ 1.77V
RES/+	4-5	2.78V ~ 3.22V
ON/OFF	3-5	-

3.	If not within specification, replace switch.38

Cruise Control Switch Installation

1. Install in the reverse order of removal....

Emission Control System

...

See also:

Component Location
1. Windshield wiper arm & blade 2. Wiper & washer switch 3. Windshield washer hose 4. Windshield wiper motor & linkage 5. Washer motor 6. Washer reservoir ...

Circuit Diagram
...

Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the steering column upper and lower shrouds. (Refer to Steering System - &quo ...

Manuals list

Copyright © xm.ksmanual.com 2014-2026