Engine Electrical SystemKia Sorento: Engine Electrical System

Kia Sorento (XM, 2011-2015) Service Manual / Engine Electrical System

Muffler Removal and Installation
1. Remove the front muffler (A) after loosening the mounting nuts. Tightening torque: 39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft) ...
Specification
Ignition System Ignition Coil Item Specification Primary Coil Resistance (Ω) 0.62...
See also:

CVVT & Camshaft Operation Principle
The CVVT has the mechanism rotating the rotor vane with hydraulic force generated by the engine oil supplied to the advance or retard chamber in accordance with the CVVT oil control valve con ...

TJ Joint Installation
1. Wrap tape around the driveshaft spline(TJ) to prevent damage to the boot. 2. Using the alignment marks (D) made during disassembly as a ...

Components and Components Location
Component 1. Front Pillar Trim2. Front Scuff Trim3. Rear Scuff Trim4. Cowl Side Trim 5. Center Pillar Lower Trim6. Center Pillar Up ...

Copyright © xm.ksmanual.com 2014-2026 - 0.051