Kia Sorento: Direct Electro Hydraulic Actuator Coupling Removal

Coupling Maintenance Precautions

Maintain the coupling at a horizontal level.

•	Refer to the handling caution level (A) when servicing the coupling (removal, installation, replacement, etc.).

Remove the 4WD coupling assembly bolts (A-3ea) mounted to the rear propeller shaft (B).

Tightening torque :

49.0 ~ 68.6 N.m (5.0 ~ 7.0 kgf.m, 36.2 ~ 50.6 lb-ft)

2.	Using a flat tool, separate the propellar shaft from 4WD coupling assembly.

3.	Disconnect the pressure sensor connector (A) and Oil hydraulic Motor connector (B).

Loosen the coupling assembly mounting bolts (A-4ea).

Tightening torque :

58.8 ~ 63.7 N.m (6.0 ~ 6.5 kgf.m, 43.4 ~ 47.0 lb-ft)

5.	Using a flat tool, separate the 4WD coupling assembly from the rear differential carrier assembly.

All units are filled up with coupling fluid (ultra-low viscosity ATF) prior to shipping. Inspection, fill-up, and replacement of coupling fluid...

1. Install in the reverse order of removal. • ...

Manuals list