Kia Sorento: Coupling Assembly - 4 Wheel Drive (4WD) SystemKia Sorento: Coupling Assembly

Kia Sorento (XM, 2011-2015) Service Manual / 4 Wheel Drive (4WD) System / Coupling Assembly

4WD ECU Installation
1. Install in the reverse order of removal. 2. Prior to installing a new ECU, upload the original ECU...
Direct Electro Hydraulic Actuator Coupling Component Location
1. Coupling assembly 2. Propeller shaft 3. Transfer assembly...
See also:

Checking the brake/clutch fluid level
Check the fluid level in the reservoir periodically. The fluid level should be between MAX and MIN marks on the side of the reservoir. Before removing the reservoir cap and adding brake/clutch* fl ...

Door Mood Lamp Installation
1. Install the door mood lamp and connector. 2. Install the front door trim. 3. Connect the negative battery te ...

Engine Control Module (ECM) Installation
1. Install in the reverse order of removal. ECM installation bolt: 9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m,7.2 ~ 8.7 lb-ft) ECM ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0345