Kia Sorento: Driver Airbag (DAB) Module and Clock Spring Inspection - Airbag Module - RestraintKia Sorento: Driver Airbag (DAB) Module and Clock Spring Inspection

Kia Sorento (XM, 2011-2015) Service Manual / Restraint / Airbag Module / Driver Airbag (DAB) Module and Clock Spring Inspection

Driver Airbag (DAB)
If any improper parts are found during the following inspection, replace the airbag module with a new one.
  
Never attempt to measure the circuit resistance of the airbag module (squib) even if you are using the specified tester. If the circuit resistance is measured with a tester, accidental airbag deployment will result in serious personal injury.
1.
Check pad cover for dents, cracks or deformities.
2.
Check the airbag module for denting, cracking or deformation.
3.
Check hooks and connectors for damage, terminals for deformities, and harness for binds.
4.
Check airbag inflator case for dents, cracks or deformities.

5.
Install the airbag module to the steering wheel to check for fit or alignment with the wheel.
Clock Spring
1.
If, as a result of the following checks, even one abnormal point is discovered, replace the clock spring with a new one.
2.
Check connectors and protective tube for damage, and terminals for deformities.

Driver Airbag (DAB) Module and Clock Spring Removal
1. Set the front tires straight-ahead before removing the steering wheel.    If th...
Driver Airbag (DAB) Module and Clock Spring Installation
1. Set the front tires straight-ahead before assembling the steering wheel.    If ...
See also:

Special Service Tools
Tools (Number and name) Illustration Use 09431-45100 Oil seal installer Installation of transfer case oil seal. (Right side) ...

Description
Windshield deicer system prevent windshield wiper from freezing in the winter season. It consists of deicer in the lower part of windshield, switch and relay. Body control module receives an ...

Relay Box (Engine Compartment) Component Location
...

Copyright © xm.ksmanual.com 2014-2026