Kia Sorento: ESC OFF Switch Inspection - ESC(Electronic Stability Control) System - Brake SystemKia Sorento: ESC OFF Switch Inspection

Kia Sorento (XM, 2011-2015) Service Manual / Brake System / ESC(Electronic Stability Control) System / ESC OFF Switch Inspection

1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the crash pad lower panel.
(Refer the Body - "Crash pad lower panel")
3.
Remove the crash pad side switch assembly (A) after loosening the screws.

4.
Check the continuity between the switch terminals as the ESC OFF switch is engaged.

ESC OFF Switch Description
1. The ESC OFF switch is for the user to turn off the ESC system. 2. The ESC OFF lamp is on when ESC OFF switch is engaged....
Steering Angle Sensor
The Steering Angle Sensor (SAS) is installed in MDPS (Motor Driven Power Steering) and it sends messages to HECU through CAN communication line. The SAS is used to determine turning direction a...
See also:

Auto Head lamp leveling Unit Inspection with GDS
Initialization and diagnosis sequence by using GDS equipment. Below content summarize the procedure for A/S using GDS. No. Procedure 1 Locate vehicle to flat ...

Clock Spring Description and Operation. Clock Spring Troubleshooting
Clock Spring Description and Operation Description The clock spring is a device that transmits the operation signal generated from the sensors installed on the front ...

OD Clutch & LR Brake Control Solenoid Valve (OD/C & LR/B_VFS) On Vehicle Inspection
Inspection 1. The automatic transaxle system can be more quickly diagnosed for problems by using the vehicle diagnostic sys ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0607