Kia Sorento: Fault Diagnosis - Automatic Transaxle SystemKia Sorento: Fault Diagnosis

Kia Sorento (XM, 2011-2015) Service Manual / Automatic Transaxle System / Fault Diagnosis

Features a fail-safe mechanism that provides "limp-home" 4th gear hold to enable the vehicle to be driven to the owner's home or dealer shop.
Fail-Safe: The TCM provides 4th gear hold and Reverse gear in the event of a malfunction.
Limp Home: Maintains minimal functionality (Drive(4th gear hold), Reverse) in the event of a malfunction, making it possible for the vehicle to reach the dealer shop.
Self-diagnosis
Transaxle Control Module (TCM) is in constant communication with the control system's components (sensors and solenoids).
If an abnormal signal is received for longer than the predefined duration, TCM recognizes a fault, stores the fault code in memory, and then sends out a fault signal through the self-diagnosis terminal. Such fault codes are independently backed up and will not be cleared even if the ignition switch is turned off, the battery is disconnected, or the TCM connector is disconnected.
  
    Tools (Number and name) Illustration Use 09200-3N000 Engine support fixture(Beam) Removal and installation of the transaxle. Except lower sup...
    See also:

    Speakers Replacement
    Front Speaker 1. Remove the front door trim. (Refer to Body - "Front door") 2. Remove the front speaker (A) after removing ...

    Blower Resistor Inspection
    1. Measure the resistance between the terminals. 2. The measured resistance is not within specification, the blower resistor must be replac ...

    Seat Heater Installation
    1. Install the driver / assist seat heater. (Refer to Body - "Front seat") 2. Install the rear seat LH heater and RH heater. ...

    Copyright © xm.ksmanual.com 2014-2026 - 0.0511