Kia Sorento: Front Hub / Knuckle / Tone Wheel Disassembly - Front Axle Assembly - Driveshaft and axleKia Sorento: Front Hub / Knuckle / Tone Wheel Disassembly

Kia Sorento (XM, 2011-2015) Service Manual / Driveshaft and axle / Front Axle Assembly / Front Hub / Knuckle / Tone Wheel Disassembly

1.
Remove the brake disc (B) from the knuckle assembly (A).

Tightening torque:
4.9 ~ 5.9N.m (0.5 ~ 0.6kgf.m, 3.6 ~ 4.3Ib-ft)

2.
Remove the hub assembly mounting bolts (B) from the knuckle (A).

Tightening torque:
78.4 ~ 98.0N.m (8.0 ~ 10.0kgf.m, 57.8 ~ 72.3lb-ft)

3.
Remove the hub assembly (C) and the dust cover (B) from the knuckle (A).
  
Do not disassemble the hub assembly.

4.
Reassembly in the reverse order of disassembly.
Front Hub / Knuckle / Tone Wheel Removal and Installation
1. Remove the front wheel and tire (A) from front hub . Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) ...
Front Hub / Knuckle / Tone Wheel Inspection
1. Check the hub for cracks and the splines for wear. 2. Check the brake disc for scoring and damage. 3. Check the kn...
See also:

Inspection
1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the MAPS at idle and IG ON. Spe ...

Driver Airbag (DAB) Removal and Installation
Removal 1. Disconnect the battery negative ( - ) terminal. ...

Inspection
1. Turn the ignition switch OFF. 2. Disconnect the VIS valve connector. 3. Measure resistance between VIS valve ...

Copyright © xm.ksmanual.com 2014-2026 - 0.055