Kia Sorento: Inspection - Variable Intake Solenoid (VIS) Valve - Engine Control System - Engine Control / Fuel SystemKia Sorento: Inspection

Kia Sorento (XM, 2011-2015) Service Manual / Engine Control / Fuel System / Engine Control System / Variable Intake Solenoid (VIS) Valve / Inspection

1.
Turn the ignition switch OFF.
2.
Disconnect the VIS valve connector.
3.
Measure resistance between VIS valve terminals 1 and 2.

Specification: Refer to "Specification"

Circuit Diagram
...
Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the variable intake solenoid valve connector (A). ...
See also:

Rear Console Cover Repair Procedures
Removal 1. Remove the floor console assembly. (Refer to Floor Console - "Floor Console Assembly") ...

Head Lamps Removal
   Head lamps become very hot during use; do not touch them or any attaching hardware immediately after they have been turn ...

Rail Pressure Sensor (RPS)
Rail Pressure Sensor (RPS) is installed on the delivery pipe and measures the instantaneous fuel pressure in the delivery pipe. The sensing element (Semiconductor element) built in the sensor ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0877