Kia Sorento: Front Strut Assembly Inspection - Front Suspension System - Suspension SystemKia Sorento: Front Strut Assembly Inspection

Kia Sorento (XM, 2011-2015) Service Manual / Suspension System / Front Suspension System / Front Strut Assembly Inspection

1.
Check the strut insulator for wear or damage.
2.
Check rubber parts for damage or deterioration.
3.
Compress and extend the piston rod (A) and check that there is no abnormal resistance or unusual sound during operation.

Disposal
1.
Fully extend the piston rod.
2.
Drill a hole on the A section to remove gas from the cylinder.

  
The gas coming out is harmless, but be careful of chips that may fly when drilling.
Be sure to wear safety goggles or eye protection when performing this task.
Front Strut Assembly Disassembly
1. Remove the dust cover(A). 2. Using the special tool (09546-26000), compress the coil spring (A). 3. Remov...
Front Strut Assembly Reassembly
1. Install the spring lower pad (D) so that the protrusions(A) fit in the holes (C) in the spring lower seat (B). 2. Compress coil spring usin...
See also:

On Vehicle Inspection
On Vehicle Inspection Diagnostic with KDS 1. The digital key system can quickly diagnosed for problems ...

Lubricants
Items Lubricants Quantity (g) Front driveshaft LSJ 104 SH06-VX21 240 ~ 255 UBJ 104 RBA 165 ~ 175 LSJ 100 ...

Front Bumper Beam Assembly Repair Procedures
Removal and Installation Front Bumper Beam 1. Remove the front bumper assembly. (Refer to Bumper (Front) - "Front Bumpe ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0642