Kia Sorento: Front Strut Assembly Reassembly - Front Suspension System - Suspension SystemKia Sorento: Front Strut Assembly Reassembly

Kia Sorento (XM, 2011-2015) Service Manual / Suspension System / Front Suspension System / Front Strut Assembly Reassembly

1.
Install the spring lower pad (D) so that the protrusions(A) fit in the holes (C) in the spring lower seat (B).

2.
Compress coil spring using special tool (09546-26000). Install compressed coil spring into shock absorber.
  
1)
Indicated identification color marks on the coil spring. Pay attention to identification mark and then install them.
2)
Install the coil spring with the identification mark directed toward the knuckle.

3.
After fully extending the piston rod, install the spring upper seat and insulator assembly.
4.
After seating the upper and lower ends of the coil spring (A) in the upper and lower spring seat grooves (B) correctly, tighten new self-locking nut temporarily.

5.
Remove the special tool (09546-26000).
6.
Tighten the self-locking nut to the specified torque.

Tightening torque
58.8 ~ 68.6N.m (6.0 ~ 7.0kgf.m, 43.4 ~ 50.6lb-ft)

Front Strut Assembly Inspection
1. Check the strut insulator for wear or damage. 2. Check rubber parts for damage or deterioration. 3. Compress and extend...
Front Lower Arm Removel
1. Remove the front wheel and tire (A) from front hub . Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) ...
See also:

Tire pressure monitoring system  TPMS
(1) Low tire pressure telltale / TPMS malfunction indicator Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by ...

Repair procedures
Removal 1. Align the steering wheel straight. 2. Disconnect the battery negati ...

Fluid Service Adjustment Procedure
Oil level Check    A check of ATF level is not normally required during scheduled services. If an oil leak is ...

Copyright © xm.ksmanual.com 2014-2026 - 0.055