Kia Sorento: Front wheel alignment
When using a commercially available computerized wheel alignment
equipment to inspect the front wheel alignment, always position the
vehicle on a level surface with the front wheels facing straight ahead.
Prior to inspection, make sure that the front suspension and steering
system are in normal operating condition and that the tires are inflated
to the specified pressure.
|

B - A > 0: Toe in (+)
B - A < 0: Toe out (-)
|
| 1. |
Loosen the tie rod end lock nut.
|
| 2. |
Remove the bellows clip to prevent the bellows from being twisted.
|
| 3. |
Adjust the toe by screwing or unscrewing the tie rod. Toe adjustment
should be made by turning the right and left tie rods by the same amount.
Tighten the hub nuts as follows.
Tightening torque:
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
...
When using a commercially available computerized wheel alignment
equipment to inspect the rear wheel alignment, always position the vehicle
on ...
See also:Special Service Tools Power Window Switch Inspection Specifications
Copyright © xm.ksmanual.com 2014-2026 - 0.0351
|