Kia Sorento: Front Wheel Speed Sensor Removal

Kia Sorento (XM, 2011-2015) Service Manual / Brake System / ESC(Electronic Stability Control) System / Front Wheel Speed Sensor Removal

1.

Remove the front wheel and tire.

Tightening torque:

88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)

2.

Remove the front wheel speed sensor mounting bolt (A).

Tightening torque:

6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 7.6 lb-ft)

3.	Remove the front wheel guard .

4.	Remove the front wheel speed sensor cable mounting bolt (A).

5.	Disconnect the front wheel speed sensor connector (B) and then remove the front wheel speed sensor.

6.	Installation is the reverse of removal.

Front Wheel Speed Sensor Components

1. Front wheel speed sensor 2. Front wheel speed sensor connector...

Rear Wheel Speed Sensor Components

1. Rear wheel speed sensor 2. Rear wheel speed sensor cable...

See also:

Opening the fuel filler lid
The fuel filler lid must be opened from inside the vehicle by pressing the fuel filler lid opener button on the driver’s door. (if equipped) ✽ NOTICE If the fuel filler lid does not open ...

Warning Messages
Shift to "P" position (for smart key system and automatic transaxle) This warning message illuminates if you try to turn off the engine without the shift lever in P (Park) position. ...

Rear Hub - Carrier Removal
1. Remove the front wheel and tire (A) from front hub. Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) ...

Manuals list

Copyright © xm.ksmanual.com 2014-2026