Kia Sorento: Front Wiper Motor Inspection - Windshield Wiper/Washer - Body Electrical SystemKia Sorento: Front Wiper Motor Inspection

Kia Sorento (XM, 2011-2015) Service Manual / Body Electrical System / Windshield Wiper/Washer / Front Wiper Motor Inspection

Speed Operation Check
1.
Remove the connector (A) from the wiper motor.

2.
Attach the positive (+) lead from the battery to terminal 2 and the negative (-) lead to terminal 5.
3.
Check that the motor operates at low or high speed as below table.

  
Common sources of contamination are insects, tree sap, and hot wax treatments used by some commercial car washes. If the blades are not wiping properly, clean both the window and the blades with a good cleaner or mild detergent, and rinse thotoughlly with clean water.
Front Wiper Motor Installation
1. Install the wiper motor. 2. Install the crank arm. Torque : 12.7-17.6Nm (1.3-1.8, kgf.m, 9.4-13.0 lbf.ft) ...
Front Washer Motor Inspection
Front and Rear Washer Motor 1. With the washer motor connected to the reservoir tank, fill the reservoir tank with water.  ...
See also:

Input Speed Sensor Installation
1. Install in the reverse order of removal.    ...

CVVT & Camshaft Description
Continuous Variable Valve Timing (CVVT) system advances or retards the valve timing of the intake and exhaust valve in accordance with the ECM control signal which is calculated by the engine ...

Operating door locks from outside the vehicle
Turn the key clockwise to unlock and counterclockwise to lock. If you lock the driver ...

Copyright © xm.ksmanual.com 2014-2026 - 0.039