Kia Sorento: Fuel Tank Air Filter Removal - Evaporative Emission Control System - Emission Control SystemKia Sorento: Fuel Tank Air Filter Removal

Kia Sorento (XM, 2011-2015) Service Manual / Emission Control System / Evaporative Emission Control System / Fuel Tank Air Filter Removal

1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Lift the vehicle.
3.
Disconnect the canister close valve connector (A).
4.
Disconnect the ventilation tube quick-connector (B) from the fuel tank air filter and canister close valve.

5.
Disconnect the vapor tube quick-connector (A).
6.
Remove the canister assembly bracket (D) after removing the mounting bolts (B) and nut (C).

7.
Remove the canister braket (B) installation bolt (A).

8.
Remove the fuel tank air filter & canister close valve assembly (A) after rotating it in the direction of the arrow in the figure.

9.
Release the lever (A), and then separate the canister close valve (B) from the fuel tank air filter (C) after rotating it in the direction of the arrow in the figure.

Fuel Filler Cap Description
A ratchet tightening device on the threaded fuel filler cap reduces the chances of incorrect installation, which would seal the fuel filler. After the gasket on the fuel filler cap and the fille...
Fuel Tank Air Filter Installation
...
See also:

Components Location
1. PCV Valve 2. Canister 3. Purge Control Solenoid Valve (PCSV) 4. Fuel Tank Pressure Sensor (FTPS) 5. Canister Close Valve (CCV) 6. Fuel Level Sender (FLS) 7. Fuel Ta ...

A/C inverter: (if equipped)
The high-capacity AC inverter supplies standard household-grade 115V/150W electrical power to operate approved portable electronic equipment and utility accessories during your travels. ...

Cylinder Block Inspection
1. Remove gasket material. Using a gasket scraper, remove all the gasket material from the top surface of the cylinder block. 2. Cl ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0322