Kia Sorento: Hazard warning flasher - Road warning - What to do in an emergencyKia Sorento: Hazard warning flasher

Kia Sorento (XM, 2011-2015) Owner's Manual / What to do in an emergency / Road warning / Hazard warning flasher

The hazard warning flasher serves as a warning to other drivers to exercise extreme


The hazard warning flasher serves as a warning to other drivers to exercise extreme caution when approaching, overtaking, or passing your vehicle.

It should be used whenever emergency repairs are being made or when the vehicle is stopped near the edge of a roadway.

Depress the flasher switch with the ignition switch in any position. The flasher switch is located in the center console switch panel. All turn signal lights will flash simultaneously.

Road warning
...
Emergency while driving
If the engine stalls at a crossroad or crossing If the engine stalls at a crossroad or crossing, set the shift lever in the N (Neutral) position and then push the vehicle to a safe place. If you ha...
See also:

Inspection
Front Door Lock Actuator 1. Remove the front door trim. (Refer to Body - "Front door") 2. Remove the front door module. ...

Safe Exit Assist (SEA): (if equipped)
While your Kia Sorento is fully stopped, Safe Exit Assist helps prevent accidental sid ...

Warning Lamp Activation
Warning Lamp Behavior after Ignition On As soon as the operating voltage is applied to the SRSCM ignition input, the SRSCM activates the warning lamp for a bulb check. The l ...

Copyright © xm.ksmanual.com 2014-2026 - 0.067