Kia Sorento: Heater & A/C Control Unit (DATC) Replacement
Kia Sorento (XM, 2011-2015) Service Manual / Heating,Ventilation And Air Conditioning / Controller / Heater & A/C Control Unit (DATC) Replacement
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Using a screwdriver or remover, remove the center fascia panel
(A).
|
| 3. |
Disconnect the clock connector (A).
|
| 4. |
Disconnect the heater and A/C controller connectors (A).
|
| 5. |
Remove the heater & A/C controller (A) from the center facia after
loosening the mounting screws.
|
| 6. |
Install in the reverse order of removal.
|
1.
Self-diagnosis process
2.
How to read self-diagnostic code
After the display panel blinks three times every 0.5 second, the
corresp...
Heater & A/C Control Unit (DATC) Self Diagnosis
Owner’s manual for the Kia Sorento MQ4 (2020-2026), the fourth generation of Kia’s mid-size SUV, offered with gasoline, diesel, hybrid, and plug-in hybrid powertrains depending on the mark...
Kia Sorento (MQ4, 2021-2026) Owner's Manual
See also:
Changing a tire with TPMS
If you have a flat tire, the Low Tire Pressure telltale will come on. Have the
flat tire repaired by an authorized Kia dealer as soon as possible or replace the
flat tire with the spare tire.
CAUTI ...
2. TCM terminal function
Connector [A]
Pin
Description
Pin
Description
1
-
45
Inhibitor switch signal 'S2'
2
-
46
Inh ...
Intake Actuator Description
The intake actuator is located at the blower unit. It regulates the intake
door by a signal from the control unit. Pressing the intake selection switch
will shift between recirculation and fr ...
Copyright © xm.ksmanual.com 2014-2026 - 0.0314