Kia Sorento: Idler Removal and Installation - Timing System - Engine Mechanical SystemKia Sorento: Idler Removal and Installation

Kia Sorento (XM, 2011-2015) Service Manual / Engine Mechanical System / Timing System / Idler Removal and Installation

1.
Remove the drive belt.
(Refer to Timing System - "Drive Belt")
2.
Remove the idler(A).

Tightening torque :
53.9 ~ 63.7 N.m (5.5 ~ 6.5 kgf.m, 39.8 ~ 47.0 lb-ft)

  
Check the idler. if it is grease leak or abnormal rotation, replace the idler.
3.
Install in the reverse order of removal.
Drive Belt Inspection
1. Visually check the belt for excessive wear, frayed cords etc. If any defect has been found, replace the drive belt.    ...
Drive Belt Tensioner Removal and Installation
1. Remove the drive belt. (Refer to Timing System - "Drive Belt") 2. Remove the drive belt auto tensioner(A). ...
See also:

Inspection
   ...

Audio Remote Control Installation
1. Install the audio remote control switch on the steering wheel front cover. 2. Install the steering wheel front cover. ...

Teaching Procedures
1. Key Teaching Procedure Key teaching must be done after replacing a defective PCM(ECM) or when providing additional keys to the vehicle owner. The procedu ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0556