Kia Sorento: IMS Control Switch Inspection - IMS (Integrated Memory) - Body Electrical SystemKia Sorento: IMS Control Switch Inspection

Kia Sorento (XM, 2011-2015) Service Manual / Body Electrical System / IMS (Integrated Memory) / IMS Control Switch Inspection

1.
Disconnect the IMS control switch connector.

2.
With the power IMS control switch in each position, make sure that continuity exists between the terminals below. If continuity is not as specified, replace the IMS control switch.

IMS Control Switch Installation
   Make sure that the IMS control switch connectors and related connectors are plugged in properly. Check the IMS control switch operates norma...
Seat Electrical
...
See also:

Heater & A/C Control Unit (Manual) Replacement
1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or remover, remove the center fascia panel (A). ...

Automatic reversal
' During power opening and closing if the power tailgate is blocked by an object or part of the body, the power tailgate will detect the resistance. If the resistance is detected while openi ...

Fuel Tank Installation
1. Install in the reverse order of removal. Fuel tank band installation bolt: 44.1 ~ 58.8 N.m (4.5 ~ 6.0 kgf.m, 32.6 ~ 43.4 lb-ft) ...

Copyright © xm.ksmanual.com 2014-2026