Kia Sorento: IMS Control Switch Installation - IMS (Integrated Memory) - Body Electrical SystemKia Sorento: IMS Control Switch Installation

Kia Sorento (XM, 2011-2015) Service Manual / Body Electrical System / IMS (Integrated Memory) / IMS Control Switch Installation

  
Make sure that the IMS control switch connectors and related connectors are plugged in properly.
Check the IMS control switch operates normally.
1.
Connect the connectors and reassemble the IMS control switch.
2.
Reassemble the front door trim.
IMS Control Switch Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the front door trim. (Refer to Body - "Front Door") 3. ...
IMS Control Switch Inspection
1. Disconnect the IMS control switch connector. 2. With the power IMS control switch in each position, make sure that continuity exists betwee...
See also:

Emergency Fastening Device (EFD) Description
Emergency Fastening Device (EFD) operates as well as Belt Pretensioner at the same time If it gets into its deploy condition after a collision. It is located at near anchor on driver and pass ...

Rear Pillar Trim Repair Procedures
Removal and Installation 1. Remove the rear door body side weatherstrip. (Refer to Door (Rear) - "Rear Door Weatherstrip ...

Reverse Parking Collision-Avoidance Assist (PCA): (if equipped)
The advanced Reverse Parking Collision-Avoidance Assist mechanism actively scans for pedestrians or physical hazards positioned directly behind your Kia Sorento, issuing timely visual and aco ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0601