Kia Sorento: IMS module Installation

Kia Sorento (XM, 2011-2015) Service Manual / Body Electrical System / IMS (Integrated Memory) / IMS module Installation

1.	Install the IMS module after reconnecting the connector.

2.

Install the driver seat.

-	Make sure the IMS module connectors and related connectors are plugged in properly.

-	Check that IMS system operates normally.

IMS module Removal

1. Remove the negative (-) battery terminal. 2. Remove the front seat assembly. (Refer to Body - "Front Seat") 3. ...

IMS Power Seat Control Circuit Diagram

...

See also:

Rear Driveshaft Removal and Installation
1. Remove the rear wheel and tire (A) from rear hub. Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) ...

Seat belt restraint system
WARNING For maximum restraint system protection, the seat belts must always be used whenever the vehicle is moving. Seat belts are most effective when seatbacks are in the upright position. ...

Fuel Filter Installation
1. Install in the reverse order of removal. ...

Manuals list

Copyright © xm.ksmanual.com 2014-2026 - 0.042