Kia Sorento: In-car Sensor (DATC only) Description - Air conditioning System - Heating,Ventilation And Air ConditioningKia Sorento: In-car Sensor (DATC only) Description

Kia Sorento (XM, 2011-2015) Service Manual / Heating,Ventilation And Air Conditioning / Air conditioning System / In-car Sensor (DATC only) Description

An in-car air temperature sensor is located in the crash pad lower panel.
The sensor contains a thermistor which measures the temperature of the inside. The signal decided by the resistance value which changes in accordance with perceived inside temperature, is delivered to the heater control unit and according to this signal the control unit regulates the in-car temperature to the intended value.

Evaporator Temperature Sensor Replacement
1. Disconnect the negative (-) battery terminal. 2. Remove the heater and blower assembly. (Refer to Heater - "Heater Unit") ...
In-car Sensor Inspection
1. Turn the ignition switch ON. 2. Blow air with changing temperature into the in-car sensor air inlet. Measure the sensor resistance between 1 and 2 ...
See also:

Engine Oil Inspection
1. Check the engine oil quality. Check the oil deterioration, entry of water, discoloring of thinning. If the quality is visibly poor, replace the oil. ...

Description
Power tailgate is an electro-mechanical system designed to provide power opening and closing of the tailgate through the push of a button of a remote key (fob), console switch, inner switch o ...

Transmission ranges
The digital indicator on the instrument cluster clearly shows the active gear shift lever position whenever the ENGINE START/STOP button is switched to the ON position. P (Park) Always bring yo ...

Copyright © xm.ksmanual.com 2014-2026